Swiss Flag
Romania Flag

Nissan 200SX Project

The Nissan 200SX Project by Import Garage; photos, updates, builds and more.


Welcome

You can scroll below for build & project updates, with pictures and a short description of each component.

My 200SX RS13
January 13, 2022

Custom accessories pulleys & cam gears

Custom pulleys and adjustable cam gears

Custom accessories pulleys to fit the ATI RB26 balancer, and Goleby adjustable cam gears. In the end, I've decided to go with these newly-released PRP adjustable cam gears instead of the Goleby ones I had.

September 16, 2020

Denso plugs and custom coil cover

Denso plugs

Got 4 of these, these are harder to find than I initially thought, at least where I live. I wanted to get the NGK BCPR7E-11s, couldn't find any, so I got the DENSO equivallent; also got a custom coil cover for the VAG coils from 5-0 Ignite.

December 25, 2019

Custom twin scroll twin WG manifold

Soara Performance exhaust manifold

Custom twin scroll, twin wastegate manifold from Soara Performance, Ukraine. I coated it in ceramic coating, along with the turbo exhaust housing. Notice the flange I got earlier.

November 08, 2019

HKS SSQV3 BOV & Z32 BMC

HKS SSQV V3 BOV

Got a HKS SSQV3 BOV and a Z32 1 1/16 brake master cylinder (painted them black), along with K&N air and oil filters.

September 29, 2019

A bigger lot is here

ISIS/ISR wheel hubs

Ok, quite a few stuff to show here.. 400lph fuel pump kit for S13 from TI Automotive, cusco side pillar bars, TTT hatch bar, UR floor bar, flywheel bolts, Cometic MLS HG, OEM overflow tank...

August 05, 2019

Camtech cams

Camtech cams

Camtech intake and exhaust cams, advertised duration: 264 degrees, lift: 8.9 mm. No longer in production, unfortunately.

April 24, 2019

TiAl MV-s WGs

TiAl MV-S wastegates

2 x TiAl MV-S external wastegates with springs & clamps, along with flanges for the mani.

March 13, 2019

More custom gauges

Custom gauges

AEM custom boost, AFR and oil pressure gauges, along with some more generic oil and water temp gauges.

February 06, 2019

Mishimoto radiators

Mishimoto J-line intercooler

Mishimoto radiator, J-Line intercooler and 19-row thermostatic oil cooler kit just came in.

December 18, 2018

Headlights restoration

Headlight restoration

Having some spare time, I set up to refurbish the headlights and headlight supports; stripped them down, wirebrushed all the rust away, applied rust converter on the brushed spots, coated everything in zinc spray, then a final coat of color paint. I also fixed the plastic cover in the meantime.

July 23, 2018

GKTech suspension parts and other bits

GKTech suspension parts

GKTech tension weld in plates, GKTECH Clutch Fan, GKTECH ABS delete kit, GKTECH Suspension Arms all around, GKTECH front & rear Z32 caliper conversion brake lines, Megan Racing bracing bar, GKTECH subframe bushes, GKTech subframe reinforcement plates and a Cusco strut tower reinforcement bar.

August 22, 2017

Link G4+ ECU

Link G4+ PnP standalone ECU

Link G4+ plug & play standalone ECU for the CA18DET, plus a speedo recalibrator for the Z32 gearbox.

November 25, 2016

CPC billet carbon intake manifold

CPC carbon billet intake manifold

CPC Billet/carbon intake manifold, with provisions for water/meth injection and other ports for sensor/vacuum. I will probably have to apply a layer of epoxy at the seams, as some people have had the manifolds separate under high boost. If this is the case, I will most likely get a Plazmaman one and be done with it.

August 11, 2016

ATI RB26 balancer and other parts

ATI RB26 balancer

ATI RB26 harmonic balancer, bronze alloy valve guides, alternator and PS pump belts, thermostat and housing, K&N oil filter, new oil pickup strainer, a new oil restrictor that goes in the block and a new main crank bolt...

July 11, 2016

Holset HX35 twin scroll turbo

Holset HX35

Got one of these in good condition :) Holset HX35 with 12 cm housing. Need to remove the wastegate and weld the internal flap so I can run external WG.

June 30, 2016

Full Type-X body kit

Type-X body kit

Bought a full Type-X body kit, including rear lights; ended up getting a new OEM front bumper with accessories and lights, since the fiberglass one just wasn't cutting it.

February 05, 2015

Alternator rebuild

Alternator

I've sorted out the alternator, I've replaced the bearings and it doesn't squeak anymore. Cleaned everything inside and coated it in some nice paint. Let's hope it charges well *fingers-crossed*.

January 13, 2015

PS pump rebuild

PS pump rebuild

I've finally finished refurb'ing the PS pump. It was full of solidified deposits of PS fluid.

November 17, 2014

New oil pump

Oil pump

The new oil pump has arrived today; I opened it up and confirmed it is the new design, which works well.

November 14, 2014

Pauter Machine forged rods

Pauter Machine forged rods

The forged Pauter Machine NIS-200-480-1330F 4340 rods fitted with ARP 2000 rod bolts finally arrived today. Pretty happy with them.

July 13, 2014

Cam covers refurb

Cam covers refurbishment

I've finally finished painting my rocker covers, not before cleaning them on the inside of all the oil deposits and gunk.

January 17, 2014

It's here !

Nissan 200SX RS13

Well, the car finally arrived, after more than a year of hard work and money saving.

It’s just as I wanted it to be, ’93 model, CA18DET, ~110.000 miles / 174.000 km. Runs nice, almost no rust, the hood needs to be fixed...